Yubico Forum

...visit our web-store at store.yubico.com
It is currently Tue Jan 30, 2018 1:04 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sun Dec 15, 2013 5:13 pm 
Offline

Joined: Fri Sep 25, 2009 2:26 am
Posts: 7
Is it expected behavior for a Nano to require removal from a USB slot and subsequent remounting in order for it to operate following a soft-boot? This is the circumstance I have observed with the NEO but not with a classic YubiKey.


Top
 Profile  
Reply with quote  

Share On:

Share on Facebook FacebookShare on Twitter TwitterShare on Tumblr TumblrShare on Google+ Google+

PostPosted: Mon Feb 03, 2014 12:12 am 
Offline

Joined: Mon Feb 03, 2014 12:09 am
Posts: 1
did you get your problem solved? I have the same issue - both on my lenovo and mac - both using nanos.. :(

/Magnus


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 03, 2014 9:05 am 
Offline
Site Admin
Site Admin

Joined: Wed Nov 14, 2012 2:59 pm
Posts: 666
Hello,

Could you please list:

- Yubikey NANO firmware version
- Laptop band/model (exact)
- USB buss manufacturer
- USB version 2, 3?

_________________
-Tom


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 03, 2014 1:04 pm 
Offline
Site Admin
Site Admin

Joined: Wed May 28, 2008 7:04 pm
Posts: 263
Location: Yubico base camp in Sweden - Now in Palo Alto
With soft boot, I assume this means rebooting without powering the computer off, i.e. performing "restart computer" command ?

No, this is of course not an intended behavior. What firmware version is this ? What happens to the device after restart ? Is the LED on or off ? Is the behavior different if the computer is powered down and then booted, i.e. "cold boot" ?

Any feedback here is appreciated. Thanks,

Jakob E


Top
 Profile  
Reply with quote  
PostPosted: Wed Aug 19, 2015 10:46 pm 
Offline

Joined: Wed Aug 19, 2015 10:32 pm
Posts: 7
Location: Denton, TX USA
[DELETED] Double posted. Sorry!


Last edited by jeffaust on Wed Aug 19, 2015 10:59 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Wed Aug 19, 2015 10:49 pm 
Offline

Joined: Wed Aug 19, 2015 10:32 pm
Posts: 7
Location: Denton, TX USA
I, too, have this problem. Laptop is a Samsung RV511-A01US running Windows 7. USB is USB 2. Chipset is "Intel(R) 5 series/3400 Series Chipset family USB Enhanced Host Controller. Nano firmware is 2.4.3. I can definitely say it behaves this way on cold boot but will have to verify whether or not it happens on warm boot (via Windows start button - restart computer). The LED is not lit unless removed and reinserted.

I'll try to verify whether or not it also happens on warm boot.

EDIT:
Verified it also happens on warm boot. Also before being reinserted Device Manager show it as an unrecognized device under the USB section. It reports that "Windows has stopped this device because it has reported problems. (Code 43)"


Top
 Profile  
Reply with quote  
PostPosted: Fri Aug 28, 2015 5:43 pm 
Offline

Joined: Wed Aug 19, 2015 10:32 pm
Posts: 7
Location: Denton, TX USA
I can also confirm that my standard yubikey (firmware 2.4.2) behaves properly. Only my nano is affected of the two keys I have.


Top
 Profile  
Reply with quote  
PostPosted: Fri Sep 04, 2015 5:05 pm 
Offline

Joined: Wed Aug 19, 2015 10:32 pm
Posts: 7
Location: Denton, TX USA
Okay I have noticed that the Nano works fine when my laptop is plugged into its power supply. So it appears to be a laptop issue. Good to know...


Top
 Profile  
Reply with quote  
PostPosted: Mon Sep 14, 2015 7:27 pm 
Offline

Joined: Wed Aug 19, 2015 10:32 pm
Posts: 7
Location: Denton, TX USA
Possibly my last update:
Okay the Nano behaves WHEN the laptop is plugged in AND charging. If the battery is charged while plugged in, it still misbehaves. Oh the little details...


Top
 Profile  
Reply with quote  
PostPosted: Mon Sep 14, 2015 8:42 pm 
Offline

Joined: Thu Oct 16, 2014 11:51 pm
Posts: 82
jeffaust wrote:
Possibly my last update:
Okay the Nano behaves WHEN the laptop is plugged in AND charging. If the battery is charged while plugged in, it still misbehaves. Oh the little details...


1. a. Does the laptop have any "always-on/charging" USB ports? Sometimes they are marked with yellow plastic inside or a different icon. If so, does the behavior differ when in one type of port vs. the other type?
b. Same question with USB 2 vs. USB 3?

2. Are there any BIOS-level USB and/or power management settings that might have an impact?

3. Does the operating system have any power-management settings related to USB? Also, sometimes these can be set up differently for mains-powered vs. battery-powered operation.

This could have an impact on the observed behavior. Though if it's only happening with one particular yubikey version, it is probably something that yubico should/could work around in future versions.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group