Yubico Forum

I would like to have an option to switch the triggers for config 1 and 2.

So pressing the button up to 1,5 seconds would trigger config 2 and
pressing the button 2,5 to 5 second would trigger config 1.

The switching of triggers/configs should not modify the configs themself, just the time-trigger.

This way I can have my personal config of choice triggered by the short keypress and still keep my yubico-supported config 1 available, but now triggerd by the longer keypress.

Harmen.

The ability to simply swop config 1 and 2, leaving everything else as untouched have been requested by others. I agree - it makes sense.

I am just a bit worried that another obscure keypress combo would make users confused and/or be unintentionally triggered. An alternative approach could be to implement a function at configuration time such as "Write to config 1, but first move current config 1 to config 2" and vice-versa. This would only work if the other config is blank to avoid that one to be unintentionally overwritten.

Please let me know if this makes sense.

With the best regards,

JakobE
Hardware- and firmware guy @ Yubico

I agree, this would be a nice option!

It was my understanding that the configurations were write-only. How would you read Config-1 in order to move it to Congif-2?
... Jim

The swap will be done "inside" the key, i.e. no secret data will go in or out via the USB interface.

The idea is to allow this function if the other configuration is not configured. This means writing to #1 using this function requires #2 to be non-configured, otherwise that one will be overwritten.

Regards,

JakobE
Hardware- and firmware guy @ Yubico