Yubico Forum

...visit our web-store at store.yubico.com
It is currently Tue Jan 30, 2018 1:24 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Jul 15, 2009 12:36 pm 
Offline

Joined: Wed Jul 15, 2009 12:26 pm
Posts: 1
I would like to have an option to switch the triggers for config 1 and 2.

So pressing the button up to 1,5 seconds would trigger config 2 and
pressing the button 2,5 to 5 second would trigger config 1.

The switching of triggers/configs should not modify the configs themself, just the time-trigger.

This way I can have my personal config of choice triggered by the short keypress and still keep my yubico-supported config 1 available, but now triggerd by the longer keypress.

Harmen.


Top
 Profile  
Reply with quote  

Share On:

Share on Facebook FacebookShare on Twitter TwitterShare on Tumblr TumblrShare on Google+ Google+

PostPosted: Thu Aug 06, 2009 9:54 pm 
Offline
Site Admin
Site Admin

Joined: Wed May 28, 2008 7:04 pm
Posts: 263
Location: Yubico base camp in Sweden - Now in Palo Alto
The ability to simply swop config 1 and 2, leaving everything else as untouched have been requested by others. I agree - it makes sense.

I am just a bit worried that another obscure keypress combo would make users confused and/or be unintentionally triggered. An alternative approach could be to implement a function at configuration time such as "Write to config 1, but first move current config 1 to config 2" and vice-versa. This would only work if the other config is blank to avoid that one to be unintentionally overwritten.

Please let me know if this makes sense.

With the best regards,

JakobE
Hardware- and firmware guy @ Yubico


Top
 Profile  
Reply with quote  
PostPosted: Fri Aug 07, 2009 10:05 pm 
Offline

Joined: Fri Aug 07, 2009 9:09 pm
Posts: 1
Quote:
to implement a function at configuration time such as "Write to config 1, but first move current config 1 to config 2" and vice-versa.

I agree, this would be a nice option!


Top
 Profile  
Reply with quote  
PostPosted: Thu Sep 17, 2009 6:09 pm 
Offline

Joined: Thu Sep 17, 2009 6:08 pm
Posts: 1
It was my understanding that the configurations were write-only. How would you read Config-1 in order to move it to Congif-2?
... Jim


Top
 Profile  
Reply with quote  
PostPosted: Sat Sep 19, 2009 7:18 pm 
Offline
Site Admin
Site Admin

Joined: Wed May 28, 2008 7:04 pm
Posts: 263
Location: Yubico base camp in Sweden - Now in Palo Alto
The swap will be done "inside" the key, i.e. no secret data will go in or out via the USB interface.

The idea is to allow this function if the other configuration is not configured. This means writing to #1 using this function requires #2 to be non-configured, otherwise that one will be overwritten.

Regards,

JakobE
Hardware- and firmware guy @ Yubico


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: YahooSeeker [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group