Yubico Forum

...visit our web-store at store.yubico.com
It is currently Tue Jan 30, 2018 12:44 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: brick ?
PostPosted: Sun Jun 12, 2016 9:41 am 
Offline

Joined: Sun Jun 12, 2016 9:02 am
Posts: 1
Hello,

Yesterday I started tryin' to use my old neo ( I don't even remember when I got it ) for some pgp stuff. Everything seemed fine for a while .. but now I get this:
Code:
[dexter@d3x-desktop ~]$ dmesg | tail -n 7
[  410.336964] usb 3-11: new full-speed USB device number 10 using xhci_hcd
[  410.502095] usb 3-11: New USB device found, idVendor=1050, idProduct=0111
[  410.502098] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  410.502099] usb 3-11: Product: Yubikey NEO OTP+CCID
[  410.502100] usb 3-11: Manufacturer: Yubico
[  410.503558] input: Yubico Yubikey NEO OTP+CCID as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:1050:0111.0007/input/input28
[  410.554229] hid-generic 0003:1050:0111.0007: input,hidraw1: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+CCID] on usb-0000:00:14.0-11/input0
[dexter@d3x-desktop ~]$ gpg --version
gpg (GnuPG) 1.4.20
Copyright (C) 2015 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Home: ~/.gnupg
Supported algorithms:
Pubkey: RSA, RSA-E, RSA-S, ELG-E, DSA
Cipher: IDEA, 3DES, CAST5, BLOWFISH, AES, AES192, AES256, TWOFISH,
        CAMELLIA128, CAMELLIA192, CAMELLIA256
Hash: MD5, SHA1, RIPEMD160, SHA256, SHA384, SHA512, SHA224
Compression: Uncompressed, ZIP, ZLIB, BZIP2
[dexter@d3x-desktop ~]$ gpg --card-status
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
[dexter@d3x-desktop ~]$ gpg2 --version
gpg (GnuPG) 2.1.11
libgcrypt 1.6.4
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Home: ~/.gnupg
Supported algorithms:
Pubkey: RSA, ELG, DSA, ECDH, ECDSA, EDDSA
Cipher: IDEA, 3DES, CAST5, BLOWFISH, AES, AES192, AES256, TWOFISH,
        CAMELLIA128, CAMELLIA192, CAMELLIA256
Hash: SHA1, RIPEMD160, SHA256, SHA384, SHA512, SHA224
Compression: Uncompressed, ZIP, ZLIB, BZIP2
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: OpenPGP card not available: Not supported
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: OpenPGP card not available: Not supported
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: OpenPGP card not available: Not supported
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: OpenPGP card not available: Not supported
[dexter@d3x-desktop ~]$ ykinfo -a
Yubikey core error: timeout
# this also yells this in dmesg each time and the led starts to flash briefly
[  566.472814] input: Yubico Yubikey NEO OTP+CCID as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:1050:0111.000A/input/input31
[  566.523304] hid-generic 0003:1050:0111.000A: input,hidraw1: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+CCID] on usb-0000:00:14.0-11/input0
# unplug and plug again
[dexter@d3x-desktop ~]$ ykinfo -a
serial: 1740506
serial_hex: 1a8eda
serial_modhex: bljutl
version: 3.0.4
touch_level: 1551
programming_sequence: 3
slot1_status: 1
slot2_status: 1
vendor_id: 1050
product_id: 111
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: OpenPGP card not available: Not supported
[dexter@d3x-desktop ~]$ gpg --card-status
gpg: pcsc_list_readers failed: unknown PC/SC error code (0x8010002e)
gpg: card reader not available
gpg: OpenPGP card not available: general error
#unplug .. plug again
[dexter@d3x-desktop ~]$ gpg --card-status
gpg: detected reader `Yubico Yubikey NEO OTP+CCID 00 00'
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
Please insert the card and hit return or enter 'c' to cancel:
[dexter@d3x-desktop ~]$ gpg2 --card-status
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error
# these start popping up in dmesg
[  732.196239] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 13 ep 4 with no TDs queued?
[  732.203040] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 13 ep 4 with no TDs queued?
[  733.806226] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 13 ep 4 with no TDs queued?


I'm sure it's not the usb port, tried an usb2 port on the same machine and tried on another too ( different linux flavor ). It behaves the same-ish ( not same order all the time ).

Any simple way to factory reset it ? Am I doing something wrong ?


Top
 Profile  
Reply with quote  

Share On:

Share on Facebook FacebookShare on Twitter TwitterShare on Tumblr TumblrShare on Google+ Google+

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group