| Yubico Forum https://forum.yubico.com/ |
|
| [SOLVED] Yubikey 4 not working with VMware https://forum.yubico.com/viewtopic.php?f=26&t=2128 |
Page 1 of 1 |
| Author: | cruiser [ Sat Dec 19, 2015 8:27 pm ] |
| Post subject: | [SOLVED] Yubikey 4 not working with VMware |
I've set the usb.generic.allowHID = "TRUE" option in my .vmx file. This works for older yubikeys, but not with the new yubikey 4. It's neither detected by opensc or the personalization tool. It does although show up in lsusb. I've downloaded the latest personalisation tool and compiled it, but had no success. Any Ideas? Versions: Ubuntu 14.04 OpenSC 13.0 Yubikey 4, v4.2.7 VMware Workstation 11.1.3 Personalisation tool v3.1.14/23 |
|
| Author: | mouse008 [ Sun Dec 20, 2015 9:23 pm ] |
| Post subject: | Re: [QUESTION] Yubikey 4 not working with VMware |
Assuming you want to use the PIV applet, I'd recommend getting the latest OpenSC from Github, rather than relying on the version packaged with Ubuntu. This advice might help with other Yubikey applets too. |
|
| Author: | cruiser [ Mon Dec 21, 2015 3:44 pm ] |
| Post subject: | Re: [QUESTION] Yubikey 4 not working with VMware |
Yes, that is my intent later. But initially I just want it to be recognized. I would assume that Yubikey personalization tool does not need opensc to detect the key? (update:) I've tried it with a more current Ubuntu version 15.04 and it seams to work. Opensc etc. works, personalization tool still does not. Stating "Unkown error occured". This looks like a bug. I'll try get around to post it on github. |
|
| Author: | Uriel [ Mon Jan 11, 2016 11:51 pm ] |
| Post subject: | Re: [SOLVED] Yubikey 4 not working with VMware |
I wonder if your Yubikey is provisioned. Something like Code: yubico-piv-tool -k -a verify-pin -a set-chuid -a set-ccc Probably done on a "real" machine rather than on a VM. Or is your intention to be able to provision the device on a VM? (I've no idea if it can work.) |
|
| Author: | Tom2 [ Thu Jan 14, 2016 3:39 pm ] |
| Post subject: | Re: [SOLVED] Yubikey 4 not working with VMware |
Do you have the latest player? Works well on my Windows 10 with: usb.generic.allowHID = "TRUE" usb.generic.allowLastHID = "TRUE" |
|
| Author: | cruiser [ Tue Jan 19, 2016 7:53 pm ] |
| Post subject: | Re: [SOLVED] Yubikey 4 not working with VMware |
Tom2 wrote: Do you have the latest player? Works well on my Windows 10 with: usb.generic.allowHID = "TRUE" usb.generic.allowLastHID = "TRUE" I've tried these two settings on my vmx file. I've compiled the latest personalisation tool for linux (as of 19.01.16, v.31.24) and as far as I'm concerned this is now working with Ubuntu 15.04. If this is now because of the new software release (x.24), or the additional "allowLastHID" I don't know. Update: I re-did the test with v.3.1.21(older) and get the same behavior, letting me believe the second setting "allowLastHID" did the trick. I still get a small hick-up where it states "Unkown firmware" in red above the image, even though under "Firmware Version" it correctly states 4.2.7. The rest does seam to work. I haven't tried to reprogram a slot. |
|
| Author: | ChrisHalos [ Tue Jan 19, 2016 9:01 pm ] |
| Post subject: | Re: [SOLVED] Yubikey 4 not working with VMware |
Make sure you have the newest version of the Personalization Tool (If you haven't already added the Yubico PPA, I would recommend going that route) If you're still seeing Unknown Firmware, run the following command in Terminal and restart: sudo sh -c 'wget -q -O - https://raw.githubusercontent.com/Yubic ... -ccid-udev | python' |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|