Yubico Forum
https://forum.yubico.com/

NDEF programming on NEO seems not to work
https://forum.yubico.com/viewtopic.php?f=26&t=1963		 Page 1 of 1
Author:  sgw [ Tue Jul 14, 2015 8:15 pm ]
Post subject:  NDEF programming on NEO seems not to work
goal: I want to be able to use the NEO to auth to LastPass on my Android phone via NFC.

So I try to program the necessary URI.

I am using Fedora Linux 22 (up2date) and when I run the personalization tool it tells me initially that only Slot 1 is configured (correct so far).

Tools - NDEF Programming - Configuration Slot 2 - NDEF payload "https://lastpass.com/mobile/?otp="

Program

-> "NDEF successfully written

When I close the tool and reopen, it still tells me that only Slot 1 is configured.

AND testing it with my Android phone it does not work ... (yes, I set mobile access to "Disabled" in LP settings and entered email/MP before it asks me to "apply" the Yubikey).

The NEO has Firmware 3.4.3 if that is important.

-

I am thankful for any pointers to make this work.
Author:  ChrisHalos [ Wed Jul 15, 2015 10:36 pm ]
Post subject:  Re: NDEF programming on NEO seems not to work
You did everything correctly except for the Configuration Slot. The NDEF Programming just defines whether the Slot 1 (short press) or Slot 2 (long press) is sent over NFC. By default, Slot 1 is sent (because it's the only slot that's programmed). If you want to send your OTP from Slot 1 for LastPass, just select "Configuration Slot 1" in the NDEF Programming section.

If you have LastPass mobile installed on your Android phone, it should be able to receive the OTP without making any programming changes to the NEO (although now you'll need to return the NDEF settings to Slot 1).

I prefer to use YubiClip to capture the OTP to the clipboard, but that's just my preference.
Author:  ocsi01 [ Thu Jul 16, 2015 12:04 am ]
Post subject:  Re: NDEF programming on NEO seems not to work
For me, Lastpass is working without any setup on the Yubikey. I logged in to my vault. Activated the Yubikey. Pressed the button at the right place ( field). Forced to use it also for the mobile.

Then login on the mobile (Android): NFC is on. Username/password-> OK. Asks for Yubikey. Taping to the NFC reader. Works.
Author:  sgw [ Thu Jul 16, 2015 9:02 am ]
Post subject:  Re: NDEF programming on NEO seems not to work
ChrisHalos wrote:
You did everything correctly except fort the Configuration Slot. The NDEF Programming just defines whether the Slot 1 (short press) or Slot 2 (long press) is sent over NFC. By default, Slot 1 is sent (because it's the only slot that's programmed). If you want to send your OTP from Slot 1 for LastPass, just select "Configuration Slot 1" in the NDEF Programming section.

If you have LastPass mobile installed on your Android phone, it should be able to receive the OTP without making any programming changes to the NEO (although now you'll need to return the NDEF settings to Slot 1).

I prefer to use YubiClip to capture the OTP to the clipboard, but that's just my preference.


Thanks for the reply.

I chose Slot2 to avoid "disabling" the OTP-feature I use via USB.
Does the choice within the NDEF tool mean "send Slot X via NFC" instead of "replace config of Slot X" then?

2nd: Do I have to press the button as well when I hold the Yubikey against the phone?
3rd: Yubiclip, aha ... advantages in this case?

Seems I have to reset the NDEF settings first, maybe I simply didn't realize to have to press the button as well!

thanks, Stefan


edit: works now, thanks! reset the NDEF to slot 1 with standard URI, and now also pressed the button ;-) ;)
Author:  ChrisHalos [ Sat Jul 18, 2015 6:32 am ]
Post subject:  Re: NDEF programming on NEO seems not to work
Button press is not required to send your slot 1 or slot 2 configuration over NFC. By holding the NEO against the NFC antenna, the NDEF settings determine which slot to output.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/