Yubico Forum

I've gone through the user guide and i cant figure out whats wrong here. I'm successfully importing users but when i try the test validation it fails.

RadTest Response: Failed!
rad_verify: Received Access-Reject packet from home server 127.0.0.1 port 1812 with invalid signature! (Shared secret is incorrect.)
rad_verify: Received Access-Reject packet from home server 127.0.0.1 port 1812 with invalid signature! (Shared secret is incorrect.)
rad_verify: Received Access-Reject packet from home server 127.0.0.1 port 1812 with invalid signature! (Shared secret is incorrect.)
radclient: no response from server for ID 195 socket 3
Sending Access-Request of id 195 to 127.0.0.1 port 1812
User-Name = "first.last"
User-Password = "PasswordandOTP"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=195, length=20
Sending Access-Request of id 195 to 127.0.0.1 port 1812
User-Name = "first.last"
User-Password = "PasswordandOTP"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=195, length=20
Sending Access-Request of id 195 to 127.0.0.1 port 1812
User-Name = "first.last"
User-Password = "PasswordandOTP"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=195, length=20



I'm using chrome to connect to the admin page, and just for giggles i went into client config under domain and changed my client shared key to 'test' and i get this error:


RadTest Response: Failed!
Sending Access-Request of id 238 to 127.0.0.1 port 1812
User-Name = "first.last"
User-Password = "PasswordandOTP"
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=238, length=20




What gives? I've gone over the config a few times and i cannot figure out why this is failing! I'm using YubiCloud to check the OTP and that works successfully.