| Yubico Forum https://forum.yubico.com/ |
|
| [QUESTION] capture OTP via NFC https://forum.yubico.com/viewtopic.php?f=26&t=2213 |
Page 1 of 1 |
| Author: | chupper [ Fri Feb 12, 2016 7:00 pm ] |
| Post subject: | [QUESTION] capture OTP via NFC |
Can the One Time Passcode be captured when resting on the NFC reader? Or must the neo be inserted in a usb slot? Is there a doc that clarifies this requirement? Thanks |
|
| Author: | lafien [ Fri Feb 12, 2016 8:52 pm ] |
| Post subject: | Re: [QUESTION] capture OTP via NFC |
Yes. Yubikey is a NDEF Tag Type 4. Here is the link with the info you need: viewtopic.php?f=26&t=1106 Edit: A doc that clarifies would be the Type 4 tag specification. |
|
| Author: | chupper [ Mon Feb 15, 2016 4:58 pm ] |
| Post subject: | Re: [QUESTION] capture OTP via NFC |
Let me get this straight. Yubico offers no tool to configure the key to behave for NFC OTP? I have to write custom code to do that? I find that hard to believe. Are we missing something here? Thanks. |
|
| Author: | chupper [ Mon Feb 15, 2016 7:15 pm ] |
| Post subject: | Re: [QUESTION] capture OTP via NFC |
One of the links that links to states the following. Additionally, it doesn't seem to say anything about the NFC support for OTP http://www.yubico.com/wp-content/upload ... l_v3.4.pdf 3.7.1 The key is inserted and the indicator light does not light up This probably means that the YubiKey does not have power ● Verify that the YubiKey is properly seated in the USB port ● Verify that the YubiKey is not inserted upside-down. ● If attached to an external hub, check that the hub has power ● Verify that another USB device works in the same port 7.7 Contact-less mode (NFC) of operation The contact-less (NFC) mode of operation is automatically enabled when the device is not plugged into the USB port. In NFC mode, the device exposes an ISO14443A interface, supporting the ISO14443-4 (T=CL) protocol. The command set is identical to the CCID mode of operation. The YubiKey button and LED are not enabled in contactless mode. Doesn't that mean NFC is not supported for the OTP? |
|
| Author: | ChrisHalos [ Wed Feb 17, 2016 1:56 am ] |
| Post subject: | Re: [QUESTION] capture OTP via NFC |
Default setting = Slot 1 is sent via NFC If you haven't made any changes to the NDEF Programming in the Personalization Tool, your Yubico OTP credential in slot 1 is sent over NFC. If you want to send Slot 2 instead, you have to change the NDEF settings using the Personalization Tool (Tools > NDEF Programming). Please search the forum, this topic has been covered extensively. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|