| Yubico Forum https://forum.yubico.com/ |
|
| Finding out the Yubikey firmware revision https://forum.yubico.com/viewtopic.php?f=16&t=85 |
Page 1 of 2 |
| Author: | Jakob [ Sun Jun 08, 2008 4:14 pm ] |
| Post subject: | Finding out the Yubikey firmware revision |
I've been asked how to check the Yubikey firmware version a few times. It can be read out via the configuration tool and also via the OS. It is stored in one of the USB descriptors. Under Windows: - Fire up the System properties. Go in under Hardware / Device manager. - Check under "Human Interface Devices". Beside mice, keyboard and other stuff you'll find the "Yubico Yubikey Touch" - Check under "Details" and browse through the list until "Firmware revision" is found. Under MacOS X: - Under "About this Mac" / "More info..." / USB, the Yubikey can be found. - The firmware revision is shown right away I just assume there is some straight-foward way to get it under Linux. If you happen to know how, please let me/us know. Regards, Jakob E Hardware- and firmware guy @ Yubico |
|
| Author: | Simon [ Mon Jun 09, 2008 8:44 am ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
Under GNU/Linux you can use 'lsusb': Code: jas@mocca:~$ lsusb Bus 005 Device 012: ID 1050:0010 ... This is the yubikey. For some reason the linux USB repository I'm using doesn't know this is a yubikey, I thought they retrieved USB listings for upstream automatically. To look at the details, you can run: Code: jas@mocca:~$ lsusb -d 1050:0010 -v Bus 005 Device 012: ID 1050:0010 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1050 idProduct 0x0010 bcdDevice 1.10 iManufacturer 1 Yubico iProduct 2 Yubico Yubikey Touch iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 71 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) jas@mocca:~$ I suspect the 'bcdDevice' is the firmware version, but I'm not sure. Jakob? /Simon |
|
| Author: | Jakob [ Mon Jun 09, 2008 8:42 pm ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
Right so. The version number in the USB descriptor is a 16-bit BCD number and 0x0110 is version 1.1.0 ... which reveals that the USB descriptor was not updated when the firmware version number was lifted to 1.2.0. Sorry for that. JakobE Hardware- and firmware guy @ Yubico |
|
| Author: | TomN [ Mon Jun 09, 2008 11:22 pm ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
The Yubikey I received last week also shows version 1.10 under WinXP's Device Manager. Tomn |
|
| Author: | DavidFlint [ Mon Jun 23, 2008 10:20 pm ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
JakobE wrote: I've been asked how to check the Yubikey firmware version a few times. It can be read out via the configuration tool and also via the OS. It is stored in one of the USB descriptors. Under Windows: - Fire up the System properties. Go in under Hardware / Device manager. - Check under "Human Interface Devices". Beside mice, keyboard and other stuff you'll find the "Yubico Yubikey Touch" - Check under "Details" and browse through the list until "Firmware revision" is found. ...... Regards, Jakob E Hardware- and firmware guy @ Yubico I have Windows Vista SP1. The Device Manager shows Human Interface Device but doesn't mention Yubico or Yubikey. The driver and details are all for a Microsoft Driver 6.0.6001.18000. Am I missing something? I also discovered Yubikeys on Security Now! Thanks. |
|
| Author: | caitsith6502 [ Mon Jun 23, 2008 11:09 pm ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
Under windows, if it doesn't show up as a Yubico Yubikey touch, You can still find out its version. It will most likely be listed as "HID Keyboard Device" under Keyboards. In any case, Yubikeys will have VID = 0x1050 and PID = 0x0010. If you go under details, and select Hardware IDs, you will find the Revision, = 0x0110. (Either 1.1 or 1.2 yubikeys, since they forgot to update the revision number for 1.2), or 0x0130 for 1.30 Yubikeys. (Oh yeah, I am another one to have discovered yubikey by security now.) |
|
| Author: | DavidFlint [ Tue Jun 24, 2008 9:42 am ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
caitsith6502 wrote: Under windows, if it doesn't show up as a Yubico Yubikey touch, You can still find out its version. It will most likely be listed as "HID Keyboard Device" under Keyboards. In any case, Yubikeys will have VID = 0x1050 and PID = 0x0010. If you go under details, and select Hardware IDs, you will find the Revision, = 0x0110. (Either 1.1 or 1.2 yubikeys, since they forgot to update the revision number for 1.2), or 0x0130 for 1.30 Yubikeys. (Oh yeah, I am another one to have discovered yubikey by security now.) Thanks - it still shows as a generic HID but I have checked the details and they do indicate it is a Version 1.1(or2) Yubikey. |
|
| Author: | merlin [ Thu Sep 25, 2008 4:35 am ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
Hi Jakob In another post (viewtopic.php?p=180#p180) you mention the bit layout of the decrypted OTP may be revised in the future. Would it would it be possible to include the firmware version (or at least the OTP layout version) in a known/fixed place in the decrypted OTP. This would allow the authentication server to know what bit layout it's trying to interpret Just a thought... 
|
|
| Author: | harish [ Fri Oct 31, 2008 1:17 pm ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
I am trying to check the firmware and other details from my Fedora 10 machine. Here's what I have from two command lsusb and lsusb -d 1050:0010 -v [root@qbic ~]# lsusb Bus 001 Device 002: ID 0bc2:3000 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Bus 004 Device 003: ID 1050:0010 Bus 004 Device 002: ID 045e:006a Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Bus 003 Device 002: ID 5543:0003 UC-Logic Technology Corp. Genius MousePen 4x3 Tablet/Aquila L1 Tablet Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 001: ID 1d6b:0001 [root@qbic ~]# lsusb -d 1050:0010 Bus 004 Device 003: ID 1050:0010 [root@qbic ~]# lsusb -d 1050:0010 -v Bus 004 Device 003: ID 1050:0010 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1050 idProduct 0x0010 bcdDevice 1.31 iManufacturer 1 Yubico iProduct 2 Yubico Yubikey Touch iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 71 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 I guess "bcdDevice 1.31" is the version number? Harish |
|
| Author: | Simon [ Thu Nov 27, 2008 11:48 am ] |
| Post subject: | Re: Finding out the Yubikey firmware revision |
harish wrote: I guess "bcdDevice 1.31" is the version number? Yup. /Simon |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|