| Yubico Forum https://forum.yubico.com/ |
|
| How to use Yubikey 2 https://forum.yubico.com/viewtopic.php?f=4&t=358 |
Page 1 of 1 |
| Author: | Jake [ Wed Jul 15, 2009 7:56 pm ] |
| Post subject: | How to use Yubikey 2 |
I've had and personalized a number of Yubikey 1's with no problem, but I can't figure out how to use the Yubikey 2. I read the docs and they say that the OTP is generated by a short press on the key, while the second OTP or static password is generated by holding the key down for much longer. I used the Yubikey PersonalizationTool v2 to assign a static password and the tool stated that I was successful, however no matter how long I hold the key down for all I get is an immediate OTP string. How can I access both modes in my 3 new Yubikey 2s? What am I doing wrong or have missed? Thanks for the help Jake |
|
| Author: | network-marvels [ Fri Jul 17, 2009 10:06 am ] |
| Post subject: | Re: How to use Yubikey 2 |
Please refer to the following forum links for more information about using the new YubiKey 2.0: viewtopic.php?f=16&t=353 viewtopic.php?f=16&t=348 We hope this helps! We would also appreciate if you can program your other YubiKeys 2.0 and check if they are correctly working. |
|
| Author: | Jake [ Wed Jul 29, 2009 5:52 pm ] |
| Post subject: | Re: How to use Yubikey 2 |
Thank you for your reply and help, network-marvels, I apologize for the delay in replying to your post. I have successfully programmed one of my 3 Yubikey 2's to work in both modes, easily and without problems. I will re-program the other two and let you know how they go as well. Thanks again Jake |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|