Figured this out - you need to leave the Client Secret set to test.
I though this needed to be the same as the RADIUS Shared Secret
| Yubico Forum https://forum.yubico.com/ |
|
| How to confirm configuration https://forum.yubico.com/viewtopic.php?f=29&t=992 |
Page 1 of 1 |
| Author: | kbrutlag [ Thu Mar 07, 2013 3:12 pm ] |
| Post subject: | How to confirm configuration |
I just started with YubiRADIUS. I have the appliance installed and configured, I've connected to our domain LDAP and can see the users, I've imported the YubiKeys and have key assigned to an account. So far so good. Is there any way to confirm everything is working as it should? I've tried RadTest on the Troubleshooting tab, but it fails every time, and I've noticed that after a few of these tests, the domain account associated with the key becomes locked out. |
|
| Author: | kbrutlag [ Thu Mar 07, 2013 9:35 pm ] |
| Post subject: | Re: How to confirm configuration |
Figured this out - you need to leave the Client Secret set to test. I though this needed to be the same as the RADIUS Shared Secret
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|