| Yubico Forum https://forum.yubico.com/ |
|
| Yubikey4 3 second flashing https://forum.yubico.com/viewtopic.php?f=26&t=2172 |
Page 1 of 1 |
| Author: | KenMacD [ Tue Jan 19, 2016 10:08 pm ] |
| Post subject: | Yubikey4 3 second flashing |
I'm getting a flash every 3 seconds with my Yubikey4. Thinks seem to work fine though. U2F/OTP work on the demo page. Code: gpg --card-status works, and after running this the light turns on solid, but instead flashes off quickly every 3 seconds.Disabling CCID stops this from happening. In the logs for pcscd I see: Code: Jan 19 16:49:51 yoga pcscd[13889]: 00000000 ifdhandler.c:130:CreateChannelByNameOrChannel() failed Jan 19 16:49:51 yoga pcscd[13889]: 00000035 readerfactory.c:1043:RFInitializeReader() Open Port 0x200000 Failed (usb:1050/0407:libudev:0:/dev/bus/usb/002/095) Jan 19 16:49:51 yoga pcscd[13889]: 00000003 readerfactory.c:335:RFAddReader() Yubico Yubikey 4 OTP+U2F+CCID init failed. Jan 19 16:49:52 yoga pcscd[13889]: 00065025 ifdhandler.c:130:CreateChannelByNameOrChannel() failed Jan 19 16:49:52 yoga pcscd[13889]: 00000011 readerfactory.c:1043:RFInitializeReader() Open Port 0x200002 Failed (usb:1050/0407:libudev:1:/dev/bus/usb/002/095) Jan 19 16:49:52 yoga pcscd[13889]: 00000003 readerfactory.c:335:RFAddReader() Yubico Yubikey 4 OTP+U2F+CCID init failed. A Code: pcsc_scan runs until identifying the card, then hangs.Code: piv-tool --serial worked yesterday, but now returns:Code: Using reader with a card: Yubico Yubikey 4 OTP+U2F+CCID 00 00 sc_card_ctl(*, SC_CARDCTL_GET_SERIALNR, *) failed -1201 I've tried resetting both PIV and openpgp. With the yubico-piv-tool I did a generate/selfsign-certificate/import-certificate and it all worked. Other ideas? |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|