| Yubico Forum https://forum.yubico.com/ |
|
| [QUESTION] Smartcard only working after pcscd restart https://forum.yubico.com/viewtopic.php?f=26&t=2452 |
Page 1 of 1 |
| Author: | TheRealSnafu [ Tue Oct 11, 2016 8:42 am ] |
| Post subject: | [QUESTION] Smartcard only working after pcscd restart |
Hello, when I plug in my Yubikey NEO on Linux Mint 18 I see the following in the log files: Code: Oct 11 09:29:49 violet pcscd[2636]: 02700324 ifdhandler.c:144:CreateChannelByNameOrChannel() failed Oct 11 09:29:49 violet pcscd[2636]: 00000014 readerfactory.c:1043:RFInitializeReader() Open Port 0x200000 Failed (usb:1050/0116:libudev:0:/dev/bus/usb/002/009) Oct 11 09:29:49 violet pcscd[2636]: 00000004 readerfactory.c:335:RFAddReader() Yubico Yubikey NEO OTP+U2F+CCID init failed. Oct 11 09:29:49 violet pcscd[2636]: 00046794 ifdhandler.c:144:CreateChannelByNameOrChannel() failed Oct 11 09:29:49 violet pcscd[2636]: 00000013 readerfactory.c:1043:RFInitializeReader() Open Port 0x200002 Failed (usb:1050/0116:libudev:1:/dev/bus/usb/002/009) Oct 11 09:29:49 violet pcscd[2636]: 00000005 readerfactory.c:335:RFAddReader() Yubico Yubikey NEO OTP+U2F+CCID init failed. Code: gpg2 --card-status tells me that no card is present. Decrypting of PGP-encrypted mails is not working then of course.When I do a Code: sudo service pcscd restart I get the exact same error message in the logs as above, but gpg2 --card-status shows my Yubikey correctly and PGP-decryption is working as expected. On Windows 10 I have a similar issue: After the login I need to reconnect my Yubikey in order to make the smartcard work. Any ideas what causes this behavior and what to do to avoid it? Thanks, Gerhard |
|
| Author: | mehdi [ Wed Feb 08, 2017 11:49 am ] |
| Post subject: | Re: [QUESTION] Smartcard only working after pcscd restart |
Until recently I was using doing the same. However, a recent upgrade of my Archlinux distro, changed the pcsc library to version 1.8.20 and the workaround does not work anymore. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|