OK, I entered static password: !OAkd;vz85!erkrFG
Why sometimes yubikey emits !OAkd;vz85!erkrFG and sometimes 1oakd;vz851erkrfg?
| Yubico Forum https://forum.yubico.com/ |
|
| Help with static password https://forum.yubico.com/viewtopic.php?f=16&t=537 |
Page 1 of 2 |
| Author: | VytautasK [ Thu May 13, 2010 8:13 am ] |
| Post subject: | Help with static password |
OK, I entered static password: !OAkd;vz85!erkrFG Why sometimes yubikey emits !OAkd;vz85!erkrFG and sometimes 1oakd;vz851erkrfg?
|
|
| Author: | samir [ Thu May 13, 2010 12:47 pm ] |
| Post subject: | Re: Help with static password |
We would appreciate if you can provide us the following information:
http://www.yubico.com/developers/personalization/ Plug your YubiKey in the USB slot. Start the YubiKey configuration utility and click on "Next". Under "Testing the YubiKey" section, select "Check the YubiKey type and firmware version" and click on "Next". Here if you see that the YubiKey type and Firmware version are listed then the YubiKey is working fine. Please send us the YubiKey type and Firmware version information. 2) Does the YubiKey emit the correct static password every time when used on other computers? 3) In which application you are experiencing this behavior of the YubiKey 4) The hardware information about your computers i.e. CPU, Keyboard make 5) Keyboard layout configured in your Windows operating systems This information will help us in debugging the problem you are facing. |
|
| Author: | VytautasK [ Thu May 13, 2010 2:41 pm ] |
| Post subject: | Re: Help with static password |
1) I have 2 Yubikeys v2 with firmware 2.1.2, received few days ago. 2) Both of them emit static passwords in the same way. 3) problems when working with Remote Desktop (XP 32bit and Windows7) and in the windows 7 "change password" screen (in the username field !OAkd;vz85!erkrFG, but in the password field I think 1oakd;vz851erkrfg because every time was denied by password policy) 4) 1. CPU i7-940, keyboard Logitech UltraX Premium, Windows 7 Ent. 64bit 2. CPU Xeon E5520, keyboard Logitech UltraX Premium, Windows 7 Ent. 64bit 3. CPU AMD Opteron, keyboard Microsoft Digital Media, Windows XP SP3 32bit 5) English (US)- default, Lithuanian (Lithuania), Russian (US) Windows 7: Display language: English Input Language: English (US) Format: Lithuanian Location: Lithuania |
|
| Author: | VytautasK [ Mon May 17, 2010 7:38 am ] |
| Post subject: | Re: Help with static password |
Any help? |
|
| Author: | samir [ Mon May 17, 2010 9:34 am ] |
| Post subject: | Re: Help with static password |
We have forwarded your post to our hardware R&D team and we will update you as soon as we get update from our hardware team. |
|
| Author: | VytautasK [ Mon May 31, 2010 2:20 pm ] |
| Post subject: | Re: Help with static password |
Nothing new? |
|
| Author: | Jakob [ Tue Jun 01, 2010 10:37 pm ] |
| Post subject: | Re: Help with static password |
Sorry for not having responded until now. I've now finally in person checked this issue out and have been able to reproduce it. I'll investigate this further and get back with a fix as soon as possible. With the best regards, JakobE Hardware- and firmware guy @ Yubico |
|
| Author: | Jakob [ Wed Jun 02, 2010 1:47 am ] |
| Post subject: | Re: Help with static password |
A fix has been found. It appears like the remote desktop client requires an explicit "shift make" and "shift break" scan code to be sent. Anyone who have problems with this issue, please send me an e-mail with your delivery address to jakob at yubico dot com and I'll send a free key with updated firmware. It may take up to two weeks from today until we run next moulding batch. Thanks for reporting this issue and again, please excuse our slow response in this matter. With the best regards, JakobE Hardware- and firmware guy @ Yubico |
|
| Author: | VytautasK [ Thu Jun 03, 2010 11:42 am ] |
| Post subject: | Re: Help with static password |
I sent you email. |
|
| Author: | VytautasK [ Fri Jun 11, 2010 5:59 am ] |
| Post subject: | Re: Help with static password |
I have sent email with delivery address 1 week ago but nobody answering me... |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|