| Yubico Forum https://forum.yubico.com/ |
|
| Yubikey PIV Manager does not see NEO https://forum.yubico.com/viewtopic.php?f=26&t=1870 |
Page 1 of 1 |
| Author: | brookz [ Tue May 05, 2015 8:53 pm ] |
| Post subject: | Yubikey PIV Manager does not see NEO |
Following this guide https://www.yubico.com/wp-content/uploa ... s_v1.0.pdf I installed the NEO Manager and successfully changed the connection mode of my NEO to OTP+U2F+CCID Windows sees it as a smartcard reader ((Microsoft Usbccid Smartcard Reader (WUDF)) Then running the PIV Manager "No Yubikey found. please insert a PIV enabled Yubikey..." What did I miss? |
|
| Author: | brookz [ Tue May 05, 2015 10:13 pm ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
Fixed. It seems the piv manager does not like ANY other smart card reader attached. |
|
| Author: | dain [ Fri May 08, 2015 9:02 am ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
Theres a bug in the PIV Manager when no "Card reader name" has been entered into the settings page (this is the default). Instead of using the default value of "Yubikey", which matches Yubikeys with CCID enabled, it uses an empty string "", which matches any CCID card reader. A workaround for now is to enter "Yubikey" in the settings. A new version of the PIV Manager that fixes this will be out shortly. |
|
| Author: | joni1101 [ Fri Dec 11, 2015 7:17 am ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
On Linux Debian 4.2 - same inssue with piv-man. Workaround of setting card reader to "yubikey" does not work. Suggestions? |
|
| Author: | TimR [ Sun Dec 20, 2015 4:19 pm ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
Same issue here, on windows 10. Tried disabling laptop's internal card reader, didn't help. Personalization Tool still says "No Yubikey Inserted". Neo manager sees it fine, and I was able to OTP into this forum. The software is up to date. |
|
| Author: | dain [ Thu Jan 21, 2016 11:25 am ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
joni1101 and TimR, could you both try running the command line tool "yubico-piv-tool" with the following options and post the output? yubico-piv-tool -v -a status The tool comes with the PIV Manager, so you should already have it installed. |
|
| Author: | mckabo [ Mon Feb 22, 2016 7:32 pm ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
$ yubico-piv-tool -v -a status error: SCardListReaders failed, rc=8010002e Failed to connect to reader. |
|
| Author: | marcoshalano [ Sat Jul 16, 2016 2:55 am ] |
| Post subject: | Re: Yubikey PIV Manager does not see NEO |
I had the same problem with YubiKey 4. The command "yubico-piv-tool -a status" just worked after I executed "opensc-tool -l". Strange, but worked. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|