Yubico Forum
https://forum.yubico.com/

[Question] Yubikey 4 not recognized by Gnupg (Fedora 23)
https://forum.yubico.com/viewtopic.php?f=35&t=2208
Page 1 of 1

Author:  jtietema [ Tue Feb 09, 2016 11:20 am ]
Post subject:  [Question] Yubikey 4 not recognized by Gnupg (Fedora 23)

My Yubikey 4 doesn't seem to be recognized by Gnupg and I am a little lost on how to properly debug this.

I guess my first question is, could me running ykpersonilize and setting the mode to an incorrect have caused this? If so, how can I detect what the current mode is?

GnuPG outputs the following:
Quote:
jeroen@ThinkPad ~ » gpg --card-status
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error


I have tried killing the gnome-keyring-agent but this doesn't seem to have any affect. I even tried logging in from command line only without a Desktop environment to no avail.

pcsc_scan reports the follwing and seems to detect the Yubikey itself:
Quote:
jeroen@ThinkPad ~ » pcsc_scan
PC/SC device scanner
V 1.4.23 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.8.13
Using reader plug'n play mechanism
Scanning present readers...
0: Yubico Yubikey 4 OTP+CCID 00 00

Tue Feb 9 21:10:05 2016
Reader 0: Yubico Yubikey 4 OTP+CCID 00 00
Card state: Card inserted,
ATR: 3B F8 13 00 00 81 31 FE 15 59 75 62 69 6B 65 79 34 D4

ATR: 3B F8 13 00 00 81 31 FE 15 59 75 62 69 6B 65 79 34 D4
+ TS = 3B --> Direct Convention
+ T0 = F8, Y(1): 1111, K: 8 (historical bytes)
TA(1) = 13 --> Fi=372, Di=4, 93 cycles/ETU
43010 bits/s at 4 MHz, fMax for Fi = 5 MHz => 53763 bits/s
TB(1) = 00 --> VPP is not electrically connected
TC(1) = 00 --> Extra guard time: 0
TD(1) = 81 --> Y(i+1) = 1000, Protocol T = 1
-----
TD(2) = 31 --> Y(i+1) = 0011, Protocol T = 1
-----
TA(3) = FE --> IFSC: 254
TB(3) = 15 --> Block Waiting Integer: 1 - Character Waiting Integer: 5
+ Historical bytes: 59 75 62 69 6B 65 79 34
Category indicator byte: 59 (proprietary format)
+ TCK = D4 (correct checksum)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
NONE

find: ‘/home/jeroen/.cache/smartcard_list.txt’: No such file or directory
Your card is not present in the database.
Please submit your unknown card at:
http://smartcard-atr.appspot.com/parse? ... 6B657934D4


So I tried get/set some information from the ykneomgr:
Quote:
jeroen@ThinkPad ~ » ykneomgr -m
00
jeroen@ThinkPad ~ » ykneomgr -M 81
error: ykneomgr_modeswitch (-4): Backend error


I don't know if I need to set the mode or if it should just work. I also don't know what this Backend error is and if I can do anything about it.

As is obvious, I don't know what I am doing, any help would be appreciated. Basically I just want to upload OpenPGP private keys.

Author:  victor.rds [ Thu Feb 11, 2016 4:32 pm ]
Post subject:  Re: [Question] Yubikey 4 not recognized by Gnupg (Fedora 23)

Using Tails 2.0, NEO worked fine, imported all keys without any incident.
But when tried to create a backup on a Yubikey 4 Nano I got the same errors, one thing I noticed yubikey-personalization-gui doesn't detect the my two Yubikey 4 (normal and a nano one), but I old key and NEO key woked fine.

I already use this yk4 for hmac-sha1 and uf2, also mode was previosly set on windows machine, where the CCID card is detected normally.

Sorry, but English isn't my native language.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/