Yubico Forum
https://forum.yubico.com/

Setting HMAC-SHA1 in Slot 2
https://forum.yubico.com/viewtopic.php?f=16&t=1253		 Page 1 of 1
Author:  karcrack [ Sat Dec 07, 2013 12:43 am ]
Post subject:  Setting HMAC-SHA1 in Slot 2
I just received my YubiKey VIP. ID > 1909500 so OTP is already unlocked in slot 2.

Slots are already programmed and protected with the access code wich is the serial by default.
The problem is that the personalization tool is unable to update Slot 2.
Image
Image

Seems like the access code is not the serial ID :?
I'm willing to override OTP with HMAC-SHA1 keeping Symantec VIP...

Thanks in advance
Author:  Tom [ Sat Dec 07, 2013 1:08 pm ]
Post subject:  Re: Setting HMAC-SHA1 in Slot 2
Hello,


Try the following:

1) Run the personalization tool in administrator mode
2) try just to change the access control code without modifying anything else, does that work? This can be achieved via the settings -> update settings, interface.

Contact support@yubico.com they will guide you through the replacement procedure if necessary.

(Show them the screenshots)
Author:  karcrack [ Sat Dec 07, 2013 4:48 pm ]
Post subject:  Re: Setting HMAC-SHA1 in Slot 2
Image
Same problem even running as administrator. I'm running Windows 8.1...

I'll send the email, thanks for the quick answer
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/