Yubico Forum

...visit our web-store at store.yubico.com
It is currently Tue Jan 30, 2018 1:08 pm

All times are UTC + 1 hour




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Wed Jul 04, 2012 10:06 pm 
Offline

Joined: Wed Jul 04, 2012 9:44 pm
Posts: 6
Hi Everyone,

I am wanting to use my yubikey in Static Password mode, but I don't want it to issue a return (enter) at the end of the static password. How can I remove this?

I have Personalisation tool 3.0.2 and firmware version 2.2.3

Any help would be much appreciated.

Thanks,
Gary


Top
 Profile  
Reply with quote  

Share On:

Share on Facebook FacebookShare on Twitter TwitterShare on Tumblr TumblrShare on Google+ Google+

PostPosted: Thu Jul 05, 2012 7:06 am 
Offline
Site Admin
Site Admin

Joined: Thu Apr 19, 2012 1:45 pm
Posts: 148
Hello,

Under the Settings tab, depress the "Enter" button under output format.

/klas


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 05, 2012 11:07 am 
Offline

Joined: Wed Jul 04, 2012 9:44 pm
Posts: 6
Thanks for your answer. I have tried this but it doesn't do anything.


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 05, 2012 11:20 am 
Offline
Site Admin
Site Admin

Joined: Thu Apr 19, 2012 1:45 pm
Posts: 148
Hello,

After you depress the enter you have to hit save at the bottom of the settings screen, and then reprogram the YubiKey with static password. I missed that save button myself when testing this a moment ago, quite hard to see and remember.

/klas


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 05, 2012 11:30 am 
Offline

Joined: Wed Jul 04, 2012 9:44 pm
Posts: 6
YEY thanks klas. It works now.

I wasn't missing the save button. I didn't realise you had to re-programme the static password after you click send. Works fine now! :)

Perhaps this would be a good little note to put in the next version of the personalisation tool as its not exactly obvious.


Thanks again


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 05, 2012 11:36 am 
Offline
Site Admin
Site Admin

Joined: Thu Apr 19, 2012 1:45 pm
Posts: 148
Yay, great!

My problem was missing the save button when I tried it.. I agree that it's not obvious how to get it right, we'll have to consider how to make it better.

/klas


Top
 Profile  
Reply with quote  
PostPosted: Tue May 06, 2014 9:02 pm 
Offline

Joined: Tue May 06, 2014 8:56 pm
Posts: 3
I found the setting that removes/includes "enter" at the end but am I correct that if I deselect it that it removes "enter" from the OTP as well as the static actions? Is it possible to remove it from the static entry only while leaving it intact so that the OTP fires off with "enter" still?

Make sense?

Thanks!


Top
 Profile  
Reply with quote  
PostPosted: Fri Jun 12, 2015 5:14 pm 
Offline

Joined: Fri Jun 12, 2015 5:10 pm
Posts: 1
I know this question is old, but I just set mine up successfully this way.

Since Klas mentioned above that the Static password is saved with the Settings that existed at the time the configuration was written, you would just want to do the following:

1: Static: Have the "Enter" depressed from the settings page when you program the Static password
2: OTP: Then unselect "Enter" and it will write that setting back to your key for the OTP, leaving the static alone.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Baidu [Spider] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group