Thinks seem to work fine though. U2F/OTP work on the demo page.
Code:
gpg --card-status
works, and after running this the light turns on solid, but instead flashes off quickly every 3 seconds.
Disabling CCID stops this from happening.
In the logs for pcscd I see:
Code:
Jan 19 16:49:51 yoga pcscd[13889]: 00000000 ifdhandler.c:130:CreateChannelByNameOrChannel() failed
Jan 19 16:49:51 yoga pcscd[13889]: 00000035 readerfactory.c:1043:RFInitializeReader() Open Port 0x200000 Failed (usb:1050/0407:libudev:0:/dev/bus/usb/002/095)
Jan 19 16:49:51 yoga pcscd[13889]: 00000003 readerfactory.c:335:RFAddReader() Yubico Yubikey 4 OTP+U2F+CCID init failed.
Jan 19 16:49:52 yoga pcscd[13889]: 00065025 ifdhandler.c:130:CreateChannelByNameOrChannel() failed
Jan 19 16:49:52 yoga pcscd[13889]: 00000011 readerfactory.c:1043:RFInitializeReader() Open Port 0x200002 Failed (usb:1050/0407:libudev:1:/dev/bus/usb/002/095)
Jan 19 16:49:52 yoga pcscd[13889]: 00000003 readerfactory.c:335:RFAddReader() Yubico Yubikey 4 OTP+U2F+CCID init failed.
A Code:
pcsc_scan
runs until identifying the card, then hangs.
Code:
piv-tool --serial
worked yesterday, but now returns:
Code:
Using reader with a card: Yubico Yubikey 4 OTP+U2F+CCID 00 00
sc_card_ctl(*, SC_CARDCTL_GET_SERIALNR, *) failed -1201
I've tried resetting both PIV and openpgp. With the yubico-piv-tool I did a generate/selfsign-certificate/import-certificate and it all worked.
Other ideas?Statistics: Posted by KenMacD — Tue Jan 19, 2016 10:08 pm
]]>