Yubico Forum

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2015-11-20T09:41:57+01:00

Because that is an old Yubikey version 2.2 not a Yubikey NEO version 3.x

Statistics: Posted by Tom2 — Fri Nov 20, 2015 9:41 am

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2015-11-16T21:14:52+01:00

NEO Manager 1.4.0 not recognize key. What is it?
Screen Shot 2015-11-16 at 23.12.09.png

Statistics: Posted by mxrootka — Mon Nov 16, 2015 9:14 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2015-09-22T21:36:22+01:00

@davidk - sorry we missed this post. The behavior you are experiencing is due to the Info.plist file not being patched. Please download and install this package on you system - https://github.com/Yubico/ifd-yubico

Please note that you'll need to run this again if you upgrade to El Capitan when it is officially released, as installing the new OS will overwrite this file.

Statistics: Posted by ChrisHalos — Tue Sep 22, 2015 9:36 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2015-05-18T14:12:25+01:00

I am using the Yubikey NEO manager (1.2.1) on Mac OS X 10.10 and I can't use all three modes at once. If I activate U2F, I can't use CCID anymore.
I've checked /usr/libexec/SmartCardServices/drivers/ifd-ccid.bundle/Contents/Info.plist and the PID is present.

Is this a known limitation or did I misconfigure my Yubikey in any way?

Thanks,
David

Statistics: Posted by davidk — Mon May 18, 2015 2:12 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-29T21:45:31+01:00

Loqe wrote:

What happened to the windows EXE? the link in the software resources has no target for version 1.0.
I can download the .tar and the .pkg fine but the .exe is gone.

It's still there on this page: https://developers.yubico.com/yubikey-n ... /Releases/

B

Statistics: Posted by brendanhoar — Sat Nov 29, 2014 9:45 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-29T16:12:31+01:00

What happened to the windows EXE? the link in the software resources has no target for version 1.0.
I can download the .tar and the .pkg fine but the .exe is gone.

Statistics: Posted by Loqe — Sat Nov 29, 2014 4:12 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-28T16:18:08+01:00

Tom wrote:

Is you Yubikey protected with an access code? The one you set up with the Yubico Personalization CommandLine/GUI

This key is used for R&D and there is only default protection settings. If I do remember right, it's zero bytes.

Statistics: Posted by dmitriys — Fri Nov 28, 2014 4:18 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-28T14:59:50+01:00

Is you Yubikey protected with an access code? The one you set up with the Yubico Personalization CommandLine/GUI

Statistics: Posted by Tom — Fri Nov 28, 2014 2:59 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-28T14:53:33+01:00

Tom wrote:

Sorry I am a bit confused here:

1) Remove all access code by selecting DISABLE access code

2) Run the Yubikey NEO manager change mode to U2F CCID OTP or whatever you like

3) Set the access code back.

This has to work, did you tried it ?

What do you mean "remvoe all access code"?
Where I can do this?

Statistics: Posted by dmitriys — Fri Nov 28, 2014 2:53 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-26T23:12:42+01:00

I think the problem was that the yubikey personalization tool from the mac app store is not up to date.

Statistics: Posted by darco — Wed Nov 26, 2014 11:12 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-26T20:41:39+01:00

DavidW wrote:

darco wrote:

Additionally, it seems I can't change the mode on a yubikey with protected profiles... which means I can't seem to have the OTP+CCID+U2F setting at the same time that I have protected profiles.

I believe that is a known limitation of the Neo firmware. The work round is to unprotect both slots, change the mode using the Neo Manager, then reinstate the slot protection.

Perfect! Thanks! It worked like a charm. I started playing with it too early and this fixed it.

Statistics: Posted by mattsvensson — Wed Nov 26, 2014 8:41 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-26T14:47:06+01:00

Statistics: Posted by Tom — Wed Nov 26, 2014 2:47 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-25T18:57:53+01:00

Tom wrote:

Do you have Chrome 39?

Yes, I have.

39.0.2171.65

And the latest version of NEO manager (v1.0)
Only two profiles can work together.

If I can help reproduce the issue let me know how the detailed logs can be provided by me?

Statistics: Posted by dmitriys — Tue Nov 25, 2014 6:57 pm

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-22T07:58:28+01:00

DavidW wrote:

darco wrote:

Additionally, it seems I can't change the mode on a yubikey with protected profiles... which means I can't seem to have the OTP+CCID+U2F setting at the same time that I have protected profiles.

I believe that is a known limitation of the Neo firmware. The work round is to unprotect both slots, change the mode using the Neo Manager, then reinstate the slot protection.

But I can't protect the slots because the yubikey personalization tool won't recognize the yubikey when all three modes are enabled. :/

Statistics: Posted by darco — Sat Nov 22, 2014 7:58 am

Re: 1.0.0 Release: NEO Manager enabling all modes on NEO & N

2014-11-21T21:15:22+01:00

darco wrote:

Additionally, it seems I can't change the mode on a yubikey with protected profiles... which means I can't seem to have the OTP+CCID+U2F setting at the same time that I have protected profiles.

I believe that is a known limitation of the Neo firmware. The work round is to unprotect both slots, change the mode using the Neo Manager, then reinstate the slot protection.

Statistics: Posted by DavidW — Fri Nov 21, 2014 9:15 pm