Yubico Forum
https://forum.yubico.com/

[QUESTION] Cannot enable use numeric keypad for digits
https://forum.yubico.com/viewtopic.php?f=16&t=2302		 Page 1 of 1
Author:  ivir [ Thu May 05, 2016 8:14 pm ]
Post subject:  [QUESTION] Cannot enable use numeric keypad for digits
Hi,
I have an issue with enable option "use numeric keypad for digits" for OATH-HOTP tokens. I tried on Yubikey STD (3.2), Yubikey Nano, Yubikey Neo and Yubikey 4 with almost same results. After several "updates/write configuration" it enables on Yubikey STD and Yubikey Nano and works. But no for Yubikey Neo and Yubikey 4. I tried without success also configuration via ykpersonalize. Only results from my experiment is problem when yubikeys aren't detected and GUI program reports that are "locked". After unplug and "discharge" I can keys configure again.

Could you, please, hint how I should realy enable it or verify that is set?

My experimentations:
Code:
[ivir@lupy ~]$ ykpersonalize -2 -a43f3e39c197f235db59010d993af48ba5cec8f20 -ooath-hotp -ooath-id=ccccbdefghij -ouse-numeric-keypad -oappend-cr
Firmware version 3.2.0 Touch level 1295 Program sequence 2

Configuration data to be written to key configuration 2:

OATH id: cccc12345678
uid: n/a
key: h:43f3e39c197f235db59010d993af48ba5cec8f20
acc_code: h:000000000000
OATH IMF: h:0
ticket_flags: APPEND_CR|OATH_HOTP
config_flags: OATH_FIXED_MODHEX2
extended_flags: SERIAL_API_VISIBLE|USE_NUMERIC_KEYPAD

Commit? (y/n) [n]: y
[ivir@lupy ~]$

Ouput: cccc+ěščřžýáčěříéý
Output with shift: CCCC12345678497541

via GUI:
Code:
LOGGING START,05.05.16 19:07
OATH-HOTP,05.05.16 19:07,1,ccccbdefghij,,43f3e39c197f235db59010d993af48ba5cec8f20,,,0,0,0,6,0,0,0,0,0,0


And after CLI command If I try at GUI update settings I get error: "YubiKey could not be configured. Perhaps protected with configuration protection access code?"

Info:
Code:
[ivir@lupy ~]$ ykinfo -a
serial: 3000883
serial_hex: 2dca33
serial_modhex: dtrlee
version: 3.2.0
touch_level: 1295
programming_sequence: 4
slot1_status: 1
slot2_status: 1
vendor_id: 1050
product_id: 111

[ivir@lupy ~]$ ykinfo -c
Yubikey core error: timeout
[ivir@lupy ~]$


Thank you
Author:  ChrisHalos [ Thu May 05, 2016 9:52 pm ]
Post subject:  Re: [QUESTION] Cannot enable use numeric keypad for digits
The feature is only available on the YubiKey Standard and YubiKey Nano
Author:  ivir [ Thu May 05, 2016 11:12 pm ]
Post subject:  Re: [QUESTION] Cannot enable use numeric keypad for digits
Thank you for reply.

Do you have some hint how solve it? I tried change scanmap (on Neo, YBK 4 I left at work), but got:
Code:
[ivir@lupy ~]$ ykpersonalize -S06050708090a0b0c0d0e0f111517181986858788898a8b8c8d8e8f9195979899a69e0032a1a235a3b0a59f2b28
Firmware version 3.2.0 Touch level 1551 Program sequence 3

A new scanmap will be written.

Commit? (y/n) [n]: y
Yubikey core error: write error
[ivir@lupy ~]$


So for Yubikey 4 is this feature available?

Thank you.

EDIT 6.5.2016:

I tried on Yubikey 4 and looks like that this feature isn't available and only via Scanmaps is possible solve it for specific keyboard layout. I tried map directly on numpad, but without success.

Yubkey Neo (3.2.0) looks broke because 10 times say :
Code:
Yubikey core error: write error
and then success and works.

Now I don't know what to do as I need solution without dependency on keyboard layout (czech QWERTZ & english QWERTY) and standard yubikey is available only 500 pcs and more and I need only 30. :(

Will be this feature returned or is deprecated and no more available?
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/